technical data sheet adaptor rpc-2.92 jack C mini-smp plug 02K118-S00S3 rosenberger hochfrequenztechnik gmbh & co. kg tel.: +49 8684 18-0 page p.o.box 1260 d-84526 tittmoning germany fa x: +49 8684 18-499 www.rosenberger.de email: info@rosenberger.de 1 / 2 rf_35/12.04/3.0 all dimensions are in mm; tolerances according to i so 2768 m-h interface rpc-2.92 according to iec 61169-35 rpc-2.92 mechanically compatible with rpc-3.50 and sma mini-smp according to mil-std-348a, fig. 328 mateable with gppo tm (gilbert engineering co., inc.) and ssmp tm (connectors devices, inc.) documents n/a material and plating connector parts material plating center contact beryllium copper gold, min. 1.27 m , over chemical nickel outer contact stainless steel passivated dielectric 1 ps dielectric 2 ptfe
technical data sheet adaptor rpc-2.92 jack C mini-smp plug 02K118-S00S3 rosenberger hochfrequenztechnik gmbh & co. kg tel.: +49 8684 18-0 page p.o.box 1260 d-84526 tittmoning germany fa x: +49 8684 18-499 www.rosenberger.de email: info@rosenberger.de 2 / 2 rf_35/12.04/3.0 f(ghz) electrical data impedance 50 w frequency dc to 40 ghz return loss 3 30 db, dc to 12 ghz 3 26 db, 12 ghz to 20 ghz 3 18 db, 20 ghz to 40 ghz insertion loss 0.05 x db insulation resistance 3 5 g w center contact resistance rpc-2.92 3.0 m w outer contact resistance rpc-2.92 2.0 m w center contact resistance mini-smp 6.0 m w outer contact resistance mini-smp 2.0 m w test voltage 750 v rms working voltage 250 v rms mechanical data mating cycles rpc-2.92 3 500 mating cycles mini-smp - full detent 3 100 center contact captivation 3 20 n coupling test torque rpc-2.92 1.70 nm recommended torque rpc-2.92 0.80 nm to 1.10 nm engagement force mini-smp - full detent 19 n max. disengagement force mini-smp - full detent 29 n max. environmental data temperature range -40c to +85c thermal shock mil-std-202, method 107, condition b corrosion mil-std-202, method 101, condition b vibration mil-std-202, method 204, condition d shock mil-std-202, method 213, condition i moisture resistance mil-std-202, method 106 rohs compliant tooling n/a packing standard 1 pce in box weight 6.7 g/pce draft date approved date rev. engineering change n umber name date herbert babinger 21/12/04 martin moder 08/07/14 c0 0 12-0205 maik knoll 08/07/14 while the information has been carefully compiled t o the best of our knowledge, nothing is intended as representation or warr anty on our part and no statement herein shal l be construed as recommendation to infringe existi ng patents. in the effort to improve our products, we reserve the right to make changes judg ed to be necessary.
|